Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

A facile and effective method was proposed to prepare the molecularly imprinted fluorescence sensor with carbon quantum dots, which were modified vinyl groups by acrylic acid on the surface. The obtained fluorescence composite material was investigated by transmission electron microscope and Fourier transform infrared spectra. After the experimental conditions were optimized, a linear range of 1.0–60 μmol L⁻¹ was obtained and the detection limit was 0.17 μmol L⁻¹. The novel fluorescence sensor can be successfully used to detect tetracycline in real samples. This study provides a convenient strategy for selective recognition and rapid detection of tetracycline in the complex environment.     

氮对镀锡钢板的强化作用

通过物理化学相分析研究了3种不同氮含量镀锡板中固溶氮、化合氮的含量,结合相关理论计算了镀锡板中氮的固溶强化和析出强化对强度的贡献。结果表明:随着总氮含量从0.0021%提高到0.0103%,钢中化合氮含量下降10.1%,但是AlN析出相中的氮的含量上升10.7%。氮在提高镀锡板强度方面发挥重要作用,钢中总氮含量提高0.0082%,其对屈服强度的贡献值提升约30 MPa。     

酸性废水中As(Ⅲ)、Cu(Ⅱ)与铁粉的反应行为

在Fe-As(Ⅲ)-Cu(Ⅱ)-H₂O体系中, 研究了酸性废水中As(Ⅲ)、Cu(Ⅱ)与金属铁粉的反应行为, 考察了反应过程中As在气、液、固三相中的分配比。结果表明, As(Ⅲ)和Cu(Ⅱ)离子被Fe还原为单质As和Cu后, As、Cu进一步结合成Cu₅As₂等金属间化合物, 从而促进As(Ⅲ)沉淀反应的发生, 且无AsH3生成。在反应时间40min、铁粉过量系数1.2、溶液初始pH=0.0、温度40 ℃、Cu/As摩尔比1.0条件下, As在气、液、固三相中的分配比分别为0、20.7%和79.3%, 沉砷率为79.3%。     

电子行业用高纯钯的制备研究

高纯钯在电子行业等领域应用广泛，需求迫切。以氯化钯为原料，提出采用氯化铵沉淀-氨水配合联合工艺净化钯溶液，水合肼还原纯净钯溶液制备高纯钯。结果表明，固体氯化钯溶解后，在合适的条件下，该钯溶液经过氧化-氯化铵沉淀、氨水配合有效去除杂质元素，获得纯净二氯四氨合钯溶液，再经水合肼还原后，获得纯度99.999%高纯钯，其碳、氧、氮等杂质元素总含量小于355×10^-6。     

一种镍基单晶高温合金高周疲劳引起的g′溶解行为研究

研究了一种镍基单晶高温合金SRR99在不同温度下的高周疲劳行为,试样采用[001]取向的单晶试棒。结果表明条件疲劳强度随着试验温度的升高先上升后降低,具有与高温拉伸强度表现出相同的变化规律。通过扫描电子显微镜和透射电子显微镜的观察发现g′相的形貌发生了显著变化,经过高温循环变形后g′析出相发生了溶解。在交变应力的作用下,g′与基体界面产生大量的位错,而位错的往复运动引起了g′相的溶解。因此循环加载过程中伴随着g′的不断溶解,共格界面的强化作用不断减弱。 除此之外,通过裂纹扩展方向与试样轴向的夹角可以判断出疲劳裂纹的扩展主要沿着(111)晶面进行,根据扫描电镜和透射电镜的观察结果对于循环加载的微观组织演化机理进行了讨论。     

Study on wax precipitation characteristics of wax deposit in pipes

Wax deposit properties are a significant concern in pipeline pigging during waxy crude oil transportation. In the present work, the impacts of flow conditions and oil properties on the wax precipitation characteristics of wax deposits are investigated. A flow loop apparatus was developed to conduct wax deposition experiments using four crude oils collected from different field pipes. The differential scanning calorimetry (DSC) technique was employed to observe the wax precipitation characteristics of crude oil and wax deposit. The results show that the wax content and the wax appearance temperature (WAT) of the deposits increase with shear stress and radial temperature gradient, and decrease with radial wax molecule concentration gradient near the pipe wall. The DSC tests on the wax deposits revealed that the deposit wax content is strongly correlated to the oil wax content. Furthermore, an empirical correlation was developed to predict the wax content and the WAT of the wax deposit. Verification of the empirical correlation using the different oils indicated that the average relative error of the wax content prediction and average absolute error of WAT prediction were 13.2% and 3.6°C, respectively.     

基于目标级联技术的含风电互联电网机组组合策略

针对含风电互联电网日前安全约束机组组合的规模大、约束复杂、求解困难等问题,提出基于目标级联分析技术的分散协调优化策略。将问题分解为负责区域间边界节点电压相角协调的上层优化问题和以并行方式独立优化各区域发电计划的下层优化问题。下层优化以弃风电量期望和电量不足期望,量化各区域内风电、负荷预测误差,以及常规机组强迫停运等系统运行不确定性所带来的风险,并以罚函数的形式引入目标函数,以综合优化系统可靠性与经济性。2区域12节点系统和IEEE RTS96三区域互联系统算例仿真验证所建模型和算法的有效性。     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

Influence of Mg concentration on structural,morphological and optical properties of nanoceria

Nano crystalline pure and Mg doped ceriaparticles were synthesized by simple chemical co-precipitation method using cerium nitrate hexahydrate as a source material and magnesium nitrate as doping precursor at room temperature. The effect of doping were investigated by X-ray diffraction pattern(XRD), FT-Raman,fourier transform infrared spectroscopy(FTIR), Ultraviolet spectroscopy(UV), photoluminescence spectroscopy(PL), field emission scanning electron microscope(FESEM) and high resolution transmission electron microscopy with energy dispersive spectroscopy (HRTEM &EDS). The X-ray diffraction pattern and FT-Raman studies showed that the prepared samples were nano particulates with cubic fluorite structure. The XRD pattern analysis showed that the size of the particles ranged from 13 to 20?nm, however 4?wt% Mg doping results in reduction of particle size compared with other doping concentrations. The effects of Mg concentration on various structural parameters of the prepared samples were also determined. The slight blue shift observed upon doping in UV–Vis absorption region around 330–360nmrecorded for reduction in particle size. The FTIR unveils the presence of Metal oxygen bonds below 700?cm^?1in the prepared samples. All samples showed a broad emission band at 430?nm with linearly increasing intensity with respect to dopant concentrations. The Spherical morphology with weak agglomeration was identified through FESEM and HRTEM analysis. The elemental analysis of Ce, O and Mg were confirmed through EDS analysis.     

A Bio‐Inspired and Biomass‐Derived Healable Photochromic Material Induced by Hierarchical Structural Design

Utilization of bionics to develop stimuli responsive polymers that can heal damage with excellent restorability is particularly attractive for a sustainable society. Herein, inspired by chameleons, a hierarchical structural design strategy is proposed and illustrated to fabricate a healable photochromic material based on a self‐healable polymeric matrix and a finely dispersed photochromic spirooxazine. The self‐healable polymeric matrix is fabricated via the integration of multiple hydrogen bonds (H bonds) and covalent cross‐links into a biomass‐derived elastomer. The dynamic nature and soft characteristics enable the as‐prepared elastomer superior extensibility as well as self‐healing ability, while the covalent cross‐links can assist the reassociation of ruptured H bonds. The representative elastomer exhibits an extensibility of 2600% and toughness of 42.76 MJ m^?3. Furthermore, it shows good self‐healing ability with complete recovery of scratch as well as restoration against 1900% of elongation and 24.1 MJ m^?3 of toughness after healing at 60 °C for 24 h. This combination of moderate toughness, good self‐healing ability, and smart photochromic property in biomass‐derived materials should largely improve their applicability, reliability, and sustainability in various materials and devices.